Product Name: Bluetooth Keyfob / wristband beacon
Model Name : DSBC-100-4
1. Introduction of DSBC-100 Bluetooth iBeacon Beacon Hardware Device
DSBC-100 is Is a keyfob/wristband Bluetooth beacon, DUSUN developed a portable sensor device. Suitable for indoor positioning, asset positioning, scenic navigation,patrol check-in, advertising push, asset management, project tracking, and other scene applications. The product is developed based on the NRF52820 chip of NORDIC Company. It has the built-in Bluetooth 5.0 an above protocol, and has the excellent function of ultra-low power consumption. It has a red LED light and button.
- Person position
- Archives
- Experimental (test) rooms
- Workshop
- Museums
- Work card
2. Appearance of DSBC-100 Bluetooth Long Range Beacon Device
|
Feature
Model
|
Long range | Bluetooth 5.0 | iBeacon | NFC | Accelerate | Beep |
|---|---|---|---|---|---|---|
| DSBC-100-1-WB | ● | ● | iBeacon(1) | ● | ● | ● |
| DSBC-100-1-LY | ● | ● | iBeacon(1) | ● | ● | ● |
|
Feature
Model
|
Long range | Bluetooth 5.0 | iBeacon | NFC | Accelerate | Beep |
|---|---|---|---|---|---|---|
| DSBC-100-3 | ● | iBeacon(1) | ● | ● | ● | |
| DSBC-100-4 | ● | Customization(5) | ||||
| DSBC-100-5 | ● | AOA(6) | ● |
Remark:
- Can be designed as a standard iBeacon, Eddystone protocol, can also meet the needs of broadcast package customization
- Optional features
- Optional features
- Optional features
- Supports 3 sets of UUIDs for broadcast in rotation, UUID content can be changed by the customer
- Support AOA standard
- Model name information:
Example ：
3. Specification of of DSBC-100 Bluetooth 5.0 and NFC Beacon Device
| Protocol | Built-in PA | Performance |
|---|---|---|
| Bluetooth 5.0 | Without PA |
|
| Bluetooth 5.2 （Long range） | Without PA |
|
| NFC | - | ISO/IEC 14443 A |
| Sensor type | Sensor IC | Performance |
|---|---|---|
| Motion sensor | KXTJ3-1058（3axis） |
|
| Item | Performance |
|---|---|
| Electronic |
|
| Item | Performance |
|---|---|
| Basis |
|
| Certification | CE FCC |
4. Caution
- Being close to a metal object will interfere with the signal, causing the signal to be weaken.
- Note the distance between DSBC-100 and the receiver to guarantee the accuracy of receiving.
- Keep away from the corrosive objects.
- Gateway usage
- Temperature & humidity sensor paired to the Bluetooth gateway.
- Bluetooth Gateway get the data from the sensor and send the information to Cloud via Wi-Fi or LTE once per second.
- Mobile phone usage
- The device will always want to send a broadcast packet nearby at a certain frequency.
- A mobile phone with Bluetooth enabled can receive the beacon information and parse the data through the APP
5. Development description
Mobile phone can read and parse beacon data and set parameters through APP
The product will running for Bluetooth Standard AOA protocol，the key parameters as below：
- Mode: Connectionless Mode，PHY 在 1M PHY，
- Interval :100ms,
- UUID16=0x184A。
- CTE_TYPE = AOA_CTE
- CTE_LEN = 160uS,
- CTE_COUNT = 1
Otherwise,The product has a built-in accelerometer for active logic. After the product is left for more than 10min, the productenters sleep mode and will be awakened when motion is detected again.
6. Installation
- Select the adhesive tape to stick to the back of the device, and tear off the adhesive tape on the back of the beacon
sensor - Just stick the beacon sensor to the surface of the object
7. Package
