DSGW-040-7 LTE Gateway allows users to connect sensors through zigbee3.0, Bluetooth5.2 and Z-wave and sent data via LTE CATM1. Read further to know its feature summary and block diagram.
Drive Your IoT Devices Development Faster, access the toolchain, API documents, and debugging tools.
An IoT gateway aggregates sensor data, translates between sensor protocols, processes sensor data before sending it onward and more.
The Dusun IoT gateways support most connectivity protocols including BLE（4.x/5.0/Mesh）, ZigBee 1.2/3.0, Z-Wave, TCP/UDP, etc. Users can connect the gateway with various BLE devices.
As the Dusun gateway is running based on the Linux system, how to implement an application over Bluez stack to ‘talk’ with BLE devices on Dusun gateways will be presented
Dusun’s gateways run Linux OpenWrt system. UBUS is a message bus in OpenWrt. Its main function is to realize information exchange between different applications.
This document describes the way to integrate the Dusun gateway to OpenHAB platform in steps.
In order to check the status, open the MQTT.fx program to subscribe from the same broker and the topic ‘t ’ where the gateway publish the data to.
From Azure platform.Set Microsoft’s connect string.Then click the apply take effect, after refreshing, you can see that the device is connected:
Copy the Test_beacon program to the gateway through ssh method, it can be done either with the WinSCP program or ssh Test_beacon
We had a LUCI management platform in the gateway, once you connect the gateway and your PC with a same router, you can log in it.
we will show you how to transfer data using a standard lwm2m protocol based on the open source project Wakayama.
